Our German WWII Toque Head Scarf Reproductions are copies of the head warmers issued to German Field units during World War Two. These scarfs were usually worn under the helmet, or field cap.

One Size
close up

Our German WWII Wehrmacht Officer’s Cap Reproduction is a fine German Army (Heer) reproduction visor cap that is perfect for the re-enactor or collector. This Wehrmacht Officer’s Cap is grey green in color, complete with infantry white piping, silver cap cords, silver colored cloth cap badge and a silver colored eagle swastika badge. Patent leather visor and leather sweat band.

Choose size: 7-1/4", 7-1/2" or 7-3/4".
close up

Our German WWII Luftwaffe Officer’s Cap Reproduction is a fine reproduction visor cap and perfect for the re-enactor or collector. This Luftwaffe Officer’s Cap is blue and black in color, complete with silver piping, silver cap cords and a silver colored Luftwaffe eagle swastika badge. Patent leather visor and leather sweat band.

Specify size: 7-1/4", 7-1/2" or 7-3/4".
close up

Our German WWII SS Visor Cap Reproduction is a fine quality reproduction visor cap that is perfect for the re-enactor or collector. This SS Death Head Visor Cap is black in color, complete with white piping, silver colored Nazi eagle and silver colored death head. Patent leather visor and leather sweat band.

Choose size: 7-1/4, 7-1/2, 7-3/4, 7-3/8, 7-5/8 or 7-7/8.
close up

With our U.S. WWII Army Officer’s Crush Cap in Khaki, you can relive the glory days of the U.S. Army Air Force during WWII. High-quality reproduction “50 Mission” Officer’s Crush Cap; so named because officers removed the wire cap stiffener to accommodate wearing head-phones while on missions. The wearer of a worn crush cap was considered an experienced combat flyer and had been on at least 50 combat missions. The crush caps became popular with ground army officers too, including general officers.

This Khaki colored cap is made from cotton twill with leather visor, chin strap and sweatband with gold colored army crest. Also available in dark green.

Choose size: 7-1/4", 7-1/2" or 7-3/4".
close up

With our U.S. WWII Army Officer’s Crush Cap you can relive the glory days of the U.S. Army Air Force during WWII. High-quality reproduction “50 Mission” Officer’s Crush Cap; so named because officers removed the wire cap stiffener to accommodate wearing head-phones while on missions. The wearer of a worn crush cap was considered an experienced combat flyer and had been on at least 50 combat missions. The crush caps became popular with ground army officers too, including general officers.

This dark green cap is made from cotton twill with leather visor, chin strap and sweatband with gold colored army crest. Also available in khaki.

Choose size: 7-1/4", 7-1/2" or 7-3/4".
close up

Designed with the female fighter in mind, this shirt is perfect for the woman who defies the stereotypes. Loose and flowing sleeves allow for excellent freedom of movement, while the long, tapered cuffs are proportioned for a woman's wrist. The shirt is long enough to be tucked in or worn belted. The cuffs are laced to assure a close fit. Delicately styled, the Swordswoman's Shirt is equally appropriate for the romantic hours of the evening. Made from 100% cotton. Comfortably sized.

We Have an Overstock of our Swordswomans Shirt in Black - Medium While Supplies Last.

The Book of Swords, Paperback By Hank Reinhardt is one of the most illuminating books ever written about swords and their use. Hank Reinhardt, spent an entire lifetime studying every aspect of swords – their use, construction, culture, myths, and history. Decades of performing (and enjoying) hands-on research and 10 years of writing went into this collection of hard facts and colorful, historical anecdotes regarding the most revered weapon of all time. Also includes sections on the forms and functions of other bladed weapons and armor.

The enjoyable, vastly informative 235 pages are sprinkled with dozens of black & white photos and illustrations. 6" x 9" softcover format.

close up

Our Atlantean King Sword from the Age of Conan Hyborian Adventures game is a perfect reproduction of the Atlantean blade. Atlantean runes adorn the blade, while gargoyle heads form the bronzed crossguard on this massive two handed sword. Features a suede wrapped, hard rubber handle for good balance and excellent control.

Please Note: This is not a metal weapon; it is a quality latex weapon for LARP and other forms of action play.

MEASUREMENTS:

Overall: 42-1/2"

Wt: Approximately 1 lb

NERO APPROVED
close up

Our Sword Hilted Umbrella is perfect for those rainy knights, this truly unique umbrella will vanquish all of those gloomy storms. The handle is styled upon our classic Gothic bastard sword, which was one of our most popular styles for many years. This full-size umbrella has auto-opening feature, measures an impressive 41 inches across and has a black exterior with a silver interior. The hilt is injected molded plastic with a metalized finish, while the grip is real leather. A shoulder strap carrying case is included, allowing you to be ready for any weather related battle.

MEASUREMENTS:

* Overall length: 39-1/2"

* Cross Guard: 9”

* Handle: 7-3/4"
close up

Our Medieval Villager Boots are men's short boots and are the perfect finishing touch for your medieval outfit. Made of faux suede, they are comfortable for a full day at the faire or for everyday wear. The ankle high boots fasten using two corded thongs in true medieval fashion. The rubber soles allow for good traction.

Available in S (fits 8-9), M (fits 10-11) or L (fits 12-13).

close up

The Sword of Malta will be made in a very limited run. We are calling it the Sword of Malta, named for the battle in which the Knights of St John turned back a huge Ottoman flotilla. This magnificent sword features a steel pommel with a deeply carved Cross of the Brotherhood, which symbolized their devotion and gave a point of prayer to the embattled soldiers, and a solid steel crossguard. The hand forged, high carbon steel blade is very well balanced for a cut, and stiff for a solid thrust. The grip is grooved wood and covered in genuine stitched leather which is hand rubbed to a deep luster. The scabbard features a custom wood sheath covered in thick leather to match the grip with steel fittings, allowing the sword to hand at a rakish angle, which was the fashion of the day. The Sword of Malta can be sharpened for additional fee.

MEASUREMENTS

* Overall: 40-3/4"

* Blade: 34" long, 1-7/8" wide, 3/16" thick"

* Wt: 2 lbs/2 oz
close up

Our Conan Wrist Cuffs and LARP Arm Bands set are from the Age of Conan Hyborian Adventures game. The cuffs weigh only 10 oz each and fits between a 9" to 12" wrist. The armbands weigh 10 oz each and fits between a 14" to 17" upper arm.

Please Note: This is not a metal armor; it is soft durable polyurethane suitable for LARP and other forms of action play.

Our hybrid polyurethane helmets and armor are a joy to have. About 1/3 the weight of the real thing, and they cost less too. The best part? No maintenance - just wear and go....anytime, any where, in any weather. They are nearly indestructible and the realistic finish will last for years.
close up


Related products:

1. LARP Conan Breastplate, Crown and Tunic (Ref: 26-884011)

2. LARP Conan Greaves and Boot Armor (Ref: 26-884013)

Our LARP Conan Greaves and Boot Armor set are from the Age of Conan Hyborian Adventures game. The greaves weigh approximately 1-1/2 pounds each and fit between 17" to 22" upper calves. The boot armor weighs approximately 5 oz each and fits 19" to 22" around the ankle area.

Please Note: This is not a metal armor; it is soft durable polyurethane suitable for LARP (Live Action Role Play) and other forms of action play.
close up

Our LARP Conan Breastplate, Crown and Tunic set from the Age of Conan Hyborian Adventures game. The breastplate is made up of the front & back, one size fits most and weighs 9 lbs. Fits between a 34" to 44" waist. Also included is a black polyester slip over tunic, one size fits most and an adjustable crown.

Please Note: This is not a metal armor; it is soft durable polyurethane suitable for LARP and other forms of action play.

Our hybrid polyurethane helmets and armor are a joy to have. About 1/3 the weight of the real thing, and they cost less too. The best part? No maintenance - just wear and go....anytime, any where, in any weather. They are nearly indestructible and the realistic finish will last for years.
close up

The Medieval Heralds Banner is a great accessory for our Medieval Heralds Trumpet. The Heralds Banner also can be used to decorate castle walls to perfection!

MEASUREMENTS:

OVERALL LENGTH: 36.5”
OVERALL WIDTH: 15.5"
close up


Related products:

1. Medieval Heralds Trumpet (Ref: ON1200)

The chemise was worn under all Medieval and Renaissance ladies' clothing. It kept the outer clothing cleaner by absorbing perspiration and was often slept in.

The drawstring neck allows you to wear the chemise on or off the shoulder. Comes with 1/2 inch ruffles at the wrist and with sewn in elastic you can pull your sleeves up and wear at the elbow.

For those of you who would like a more authentic chemise we've added the option of having the wrist tied with lace rather than with elastic at no additional cost.

Made from 100% cotton. Available in White or Natural.
S(50" circumference), M(60"), L(75"), XL(90")

We Have an Overstock of our Long Plain Chemise in Natural - While supplies last.

Our historic Wild West Padlock has a solid brass and steel construction with double locking bolt mechanism. Includes 2 keys.

Weight: 2 lbs.

close up

People who bought this item also bought:

1. LARP Spoke Shield (Ref: DC-488-L)

2. Italo Corinthian Helmet Iron (Ref: AH-6058-I)

3. Assegai Spear with Long Shaft (Ref: 95E)

Our Redbeard Pirate Shirt is made from thick and rich Viscose fabric. This V-neck pirate shirt has eyelets and drawstring closure in front. Sleeves are loose fitting with a small frill at the wrist.

Great for Renaissance, Pirate and LARP events.

close up

People who bought this item also bought:

1. Medieval Fleece Hood (Ref: TT-221)

2. Flair Bow Barrette (Ref: RJ12235)

3. Large Hanging Pouch (Ref: R-025)

4. Archer's Quiver (Ref: BTS-2350)

5. Large Leather Sword Frog (Ref: BTS-2265)

6. Medieval Dagger Frog (Ref: BTS-2255)

7. Medieval Axe Frog (Ref: BTS-2251)

8. Medium Economy Arm Bracers (Ref: BTS-2150-E)

9. Pants (Ref: 100274)

Our Roberto Cofresi Pirate Shirt is made from thick and rich Viscose fabric. Lacy frill in front and on the cuffs gives it the Pirate and Renaissance look. Eyelets with drawstring has been provided in front for easy wearing.

Gives the convenience of wearing the pirate shirt with or without the front frill.

close up